PRODUCTS
Contact us
：1 Floor, No. 8 Huashan Road, Shanyang Town, Jinshan District, Shanghai
：+86 021-31170068
： m.123689.net
：sales@shqhvalve.com
：+86 021-31170068
： m.123689.net
：sales@shqhvalve.com
Your location is: Products >> Gate valve >> Forged Steel Internal Thread Gate Valve
Forged Steel Internal Thread Gate Valve
Product overview
Forged steel internal thread gate valve is suitable for small diameter pipeline with pressure of 1.6 ~ 42.0mpa (Class 150 ~ 2500), working temperature of - 29 ~ 425 ℃ (carbon steel) or - 29 ~ 500 ℃ (stainless steel). It is used to cut off or connect the medium in the pipeline. It can be applied to water, steam, oil, nitric acid, acetic acid, oxidizing medium, urea and other media respectively. It is widely used in oil pipeline.
Product details
Product Features
The internal thread of forged steel is mostly of Dalian type reduced diameter design. Compared with the cast steel gate valve of the same diameter, the flow rate is slightly smaller, but the pressure and temperature range it bears is higher than that of the cast steel gate valve, the sealing performance is also much better than that of the cast steel gate valve, and the service life is longer. The flow direction of the medium is not limited as other gate valves.
Execution Standard
Design spec：JB/T 7746
Performance Parameter
Nominal diameter：DN8~50mm
Face to Face：JB/T 7746
Flange end：JB/T 79、GB/T 9113、HG/T 20592
Test & check：GB/T 26480
Pressure-temp：JB/T 7746 、GB/T 12224
Nominal Pressure：PN1.6～16MPa
Applicable media：Water, oil, steam, nitric acid
Applicable temperature：≤550℃
Main materials：A105、LF2
Contact
Add: No.8, Huashan Road, Shanyang Town, Jinshan District, Shanghai
Tel:+86 021-31170068
Cell: +86 13817056698 +86 13361816929
Site: m.123689.net
E-mail:sales@shqhvalve.com
Mobile access
Copyright © Shanghai Quanhang Valve Manufacturing Co., Ltd. all rights reserved ICP2020025282
Website construction: Fengsheng Technology
